New Stiler RĘBAK TARCZOWY CIĄGNIKOWY BX 62R, TRACTOR WOOD CHIPPER 15CM
≈ $6,084
Sokołów Podlaski
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 792 75...
Show
+48 792 750 200
Poland 
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Opalenica
Poland, Opalenica
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Sokołów Podlaski
Poland, Poznań
Poland, Solec-Zdrój
Poland, Poznań
Poland, Podegrodzie
Poland, Słupia
Poland, Słupia
Poland, Słupia
Poland, Słupia
Poland, Słupia
The STILER BX62R WOOD CHIPPER is used for shredding branches, tree trunks up to 15 cm in diameter, with roots up to 30 cm.
A newer reinforced model.
EQUIPPED WITH A NEW GENERATION HYDRAULIC SYSTEM WITH RELIABLE DISTRIBUTORS !!!
Technical data:
Model: BX62R
The size of the shredded material: 15cm in diameter (maximum 30cm with roots)
Drive system: Drive from tractor engine transmitted by PTO
Minimum tractor power: 30 hp
Rotor size: 740 mm
Rotor thickness: 25 mm
Number of cutting knives: 4 + 1 counterblade
Knife type: Hardened tool steel CR12
Material feeding mechanism: Own hydraulic pump - 2 gears
Mounting system: Three-point suspension system (three-point linkage)
Dimensions (with folded hopper): 127cm D x 132cm S x 215cm
Rotation range of the ejection tube: 360 °
The height of the ejection tube: 215 cm
Nominal revolutions per minute / Nominal revolutions: 540-1000
Chipper weight: 485 kg
Included:
PTO OF POWER RECEIPT (PTO) FREE!
Specification:
The material collecting system consists of two hydraulically driven cogged shafts.
The material retrieval mechanism has a 10-step speed controller and a material dispensing function.
The hydraulic system drive comes from own hydraulic pump.
The chipper has a massive disc with a diameter of 740 mm and a thickness of 25 mm.
There are 4 cutting blades on both sides, sharpened 240 mm x 60 mm.
In addition, the shield shield is secured against a knife.
The construction of the rotor allows for long-term work without loading the tractor.
All bearings protected against dust, stripping, etc. are lubricated by easily accessible calendars.
The disc also has breakers (shovels) shredding the resulting framework to a value of 20-50 mm.
The chipper with a three-point linkage (TUZ) is designed to work with a farm tractor with a minimum power of 30 km.
The drive from the tractor to the chipper is transferred by means of a transmission shaft equipped with a safety pin, which is cut in the event of too much load on the machine and disconnects the direct drive.
The chipper is additionally equipped with shield ventilation.
The set also includes PTO PTO shaft
The generated chips are thrown by a tube rotated by 360 ° in relation to the chipper's base.
The chips obtained have dimensions from 20mm to 60mm.
4 knives sharpened on both sides ensure very high productivity and longevity of the machine. The blades are made of hard tool steel. The machine has 1 counterblade.
The back of the shield has been equipped with breakers and shovels for more efficient ejection of chips from the machine
The machine has two hydraulic feeding rollers. They accelerate work and make it easier to feed branches to the target. In addition, the machine has 10 feed speeds and reverse gear for branch retraction.
The revolutions are transmitted through a power take-off shaft where we connect the machine directly to the tractor shaft. The minimum required rotation of the roller is 540 rpm.
The machine is equipped with a three-point linkage suspension system.